Pressure switches 24A/F
Pressure switches 24A/F
◆ Features
• Low-cost solution for mechanical pressure monitoring.
• Stable switching point even after long use and high load.
• Switching point easily adjustable – also during use.
• High pressure resistance, compact, small switch available as normally closed (nc) or normally open (no).
• Stable switching point even after long use and high load.
• Switching point easily adjustable – also during use.
• High pressure resistance, compact, small switch available as normally closed (nc) or normally open (no).
| Voltage | max 42V |
| Current rating | max 4A |
| Temperature stability for diaphragm/seal materials | 100VA |
| NBR -40℃——+100℃ | |
| EPDM -30℃——+120℃ | |
| FKM -5℃——+120℃ | |
| Silicone -40℃——+120℃ | |
| HNBR -30℃——+120℃ | |
| Switching frequency | 200/min |
| Mechanical life expectancy | 106 switching cycles(for diaphragm pressure switches the switching life applies to pressure up to a max of 50 bar) |
| Pressure rise rate | ≦O.1 MPa/ms |
| Hysteresis(Only preset at factory) |
average value 5-30% depending on type, not adjustable |
| Vibration resistance |
10g/5-200Hz sine wave |
| Shock resistance |
294m/s2 ; 14ms half sine wave |
| Degree of protection |
IP65, IP00 connector terminals
|
| Weight | approx 90g |